Lancom Systems 61728 Datový list stáhnout pdf (Strana 5)

Security

Monitoring and blocking of login attempts and port scansIntrusion Prevention

Source IP address check on all interfaces: only IP addresses belonging to the defined IP networks are allowedIP spoofing

Filtering of IP or MAC addresses and preset protocols for configuration accessAccess control lists

Protection from fragmentation errors and SYN floodingDenial of Service protection

Detailed settings for handling reassembly, PING, stealth mode and AUTH portGeneral

Filtering of unwanted URLs based on DNS hitlists and wildcard filtersURL blocker

Password-protected configuration access can be set for each interfacePassword protection

Alerts via e-mail, SNMP-Traps and SYSLOGAlerts

EAP-TLS, EAP-TTLS, PEAP, MS-CHAP, MS-CHAPv2 as EAP authentication mechanisms, PAP, CHAP, MS-CHAP and MS-CHAPv2 as PPP authentication

mechanisms

Authentication mechanisms

Limitation of the allowed transfer protocols, source and target addresses on the WLAN interfaceWLAN protocol filters

Adjustable reset button for 'ignore', 'boot-only' and 'reset-or-boot'Adjustable reset button

Fixed redirection of any packet received over the WLAN interface to a dedicated target addressIP redirect

High availability / redundancy

VRRP (Virtual Router Redundancy Protocol) for backup in case of failure of a device or remote station. Enables passive standby groups or reciprocal

backup between multiple active devices including load balancing and user definable backup priorities

VRRP

For completely safe software upgrades thanks to two stored firmware versions, incl. test mode for firmware updatesFirmSafe

Optional operation of an analog or GSM modem at the serial interfaceAnalog/GSM modem backup

Line monitoring with LCP echo monitoring, up to 4 addresses for end-to-end monitoring with ICMP pollingLine monitoring

Routing functions

IP and NetBIOS/IP multi-protocol routerRouter

Separate processing of 16 contexts due to virtualization of the routers. Mapping to VLANs and complete independent management and configuration

of IP networks in the device, i.e. individual settings for DHCP, DNS, Firewalling, QoS, VLAN, Routing etc. Automatic learning of routing tags for

ARF contexts from the routing table

Advanced Routing and Forwarding

HTTP and HTTPS server for configuration by web interfaceHTTP

DNS client, DNS server, DNS relay, DNS proxy and dynamic DNS clientDNS

DHCP client, DHCP relay and DHCP server with autodetection. Cluster of several LANCOM DHCP servers per context (ARF network) enables caching

of all DNS assignments at each router. DHCP forwarding to multiple (redundant) DHCP servers

DHCP

NetBIOS/IP proxyNetBIOS

NTP client and SNTP server, automatic adjustment for daylight-saving timeNTP

Policy-based routing based on routing tags. Based on firewall rules, certain data types are marked for specific routing, e.g. to particular remote

sites or lines

Policy-based routing

Dynamic routing with RIPv2. Learning and propagating routes; separate settings for LAN and WAN. Extended RIPv2 including HopCount, Poisoned

Reverse, Triggered Update for LAN (acc. to RFC 2453) and WAN (acc. to RFC 2091) as well as filter options for propagation of routes. Definition

of RIP sources with wildcards

Dynamic routing

IPv6 routerIPv6 router

DHCPv6 client, DHCPv6 server, DHCPv6 relay, stateless- and stateful mode, IPv6 address (IA_NA), prefix delegation (IA_PD)DHCPv6

Layer 2 functions

Packets sent in response to LCOS service requests (e.g. for Telnet, SSH, SNTP, SMTP, HTTP(S), SNMP, etc.) via Ethernet can be routed directly to the

requesting station (default) or to a target determined by ARP lookup

ARP lookup

COM port server

COM-port server for the DIN interface. For a serial device connected to it, the server manages its own virtual COM port via Telnet (RFC 2217) for

remote maintenance (works with popular virtual COM-port drivers compliant with RFC 2217). Switchable newline conversion and alternative binary

mode. TCP keepalive according to RFC 1122 with configurable keepalive interval, retransmission timeout and retries

COM port forwarding

LAN protocols

ARP, proxy ARP, BOOTP, DHCP, DNS, HTTP, HTTPS, IP, ICMP, NTP/SNTP, NetBIOS, PPPoE (server), RADIUS, RIP-1, RIP-2, RTP, SIP, SNMP, TCP, TFTP,

UDP, VRRP, VLAN

LANCOM L-460agn dual Wireless

Features as of: LCOS 8.80

1 2 3 4 5 6 7 8

LANCOM L-460agn dual Wireless 1

Komentáře k této Příručce

Žádné komentáře

Lancom Systems 61728 Datový list Strana 5

Komentáře k této Příručce

Související produkty a manuály pro Přístupové body WLAN Lancom Systems 61728